Wizzard MODIFIED STORM 3 OHM ARM, POLY MAGS, FAST!



$115

A MODIFIED CLASS HO SLOT CAR!  

IF YOU WANT THE KIND OF SLOTCAR THAT YOU CAN TAKE TO A BIG RACE AND BE COMPETITIVE, THEN THIS IS WHAT YOU'D BE LOOKING AT. This is a "MODIFIED" Wizzard STORM (which means it has a 3.0 ohm armature, ceramic motor magnets, and polymer traction magnets). This car is race legal for most of the modified class racing rules out there (Hopra, Ufhora, Marc, Schor, etc.), yet YOU CAN STILL RUN IT ON A HOME OR CLUB TRACK WITH A STOCK POWER SUPPLY! This slot car is is a brand new and READY TO RACE. It has a super fast balanced 37 gauge 3.0 ohm armature. It also has high performance motor brushes and high temperature springs, a Wizzard Aluminum Independent front end. "PRO" PICK-UP SHOES, Strong bonded POLYMER TRACTION MAGNETS, an upgraded pinion, a BSRT Delrin crown gear, and a set pair of Wizzard "Radical Radial" Silicone sponge rear tires (colors may vary). The Storm chassis has an adjustable guide pin. This car can be raced on Tomy, Tyco, Lifelike, Marchon, and custom HO Slot car tracks. It was built and race-tuned by one of So-Cal's fastest magnet racers. It's very fast and easy to drive. An AWESOME CAR, SUPER FAST, BUT EASY TO DRIVE!!. You will win lots of races with this one. CHECK OUT MY OTHER AUCTIONS FOR MORE FAST HO SLOTCARS!

Parma 90 Ohm Controller - THE BEST FOR T-JETS

$32.00

A brand new Parma 90 OHM controller is an excellent replacement for the stock controller that comes with Tomy, Tyco, Mattel, AFX, Life-like, and most other HO Racesets. It is the perfect controller to use if you race T-jets.


*Handle colors may vary

Controller Recommendations:

60 to 90-ohms - Suggested for T-Jets on any type of layout.
45-ohms - Suggested for Stock Tyco/Tomy/Life-Like cars on small twisty layouts.
25 to 35-ohms - For Stock or Modified cars on large, fast layouts.
15 to 25-ohms - For Modified/Polymer cars on fast layouts.
4 to 15-ohms - For Neo/Unlimited cars with high-strength magnets on layouts with plenty of power.

BLUE BULLET - Balanced Hot Stock Arm for G cars



$18.00



Armatures for the Tomy Super G+ car are getting harder to find. 

This is a "Blue Bullet"  Balanced "Hot Stock" armature for the BSRT G3, G3R, Tomy Super G+, and Tomy Turbo HO Slot cars.  This armature is for racing in the Super Stock class or just making your stock slotcar run faster, smoother, and rev higher.  It has a lathe trued commutator, and has been Dynamically balanced by one of the best in the business.   If you race in the Super Stock class and can't seem to find enough horsepower to get to the front of the pack, then this is the high revving - front running arm that you are looking for.  "I've run them all and the Blue Bullet is the fastest one!"  This armature It is in compliance (5.8 Ohms or above - folded tabs, narrow gap) with most of the National and Regional HO racing rules out there (Hopra, Marc, Schor, Ufhora, etc.) so it's legal to race.  Works great with any power supply and on home, club, and commercial tracks.

Horsepower to OHMs - Comparison Chart

HO Slot Car Gear Chart

Life Like & Rokar Snap in, Hop-up kit FASTER, SMOOTHER

$14.00

The fastest and easiest (and cheapest) way to make your Lifelike or Rokar M chassis car better is to replace the wheels and tires.  This will immediately make your stock car faster and handle better (due to better grip and a lower center of gravity). You simply remove the stock front and rear axles and pop in the new set. For the front you get O-ring style front wheels and axle, and for the rear you get a set up of double flanged narrow rims and narrow slip on silicone tires - along with a  Pro Crown gear for faster and smoother performance. YOU'LL BE AMAZED AT THE DIFFERENCE.

PRO 23 Tooth CROWN GEAR on Axle

$9.00

Tomy AFX - FORD GT-40 with BSRT G3-R Chassis, Polymer Magnets



The highly detailed Tomy AFX, Ford GT-40 HO Slot car body is one of the best looking HO hardbodies ever made, it's very low center of gravity and sleek design also make it one of the very best handling hard bodies available.  Couple this with the superior HO racing inspired G3 chassis and the thick "Polyforce" traction magnets, and you have an unbeatable hardbody combination.  It's faster and better handling than any stock Mega-G, Super G+, SRT, or Turbo you will ever find. This IS the set-up to have if you want to run fast AND look good doing it. This package includes: Pro-pickup shoes and bonded (hand-notched) Polymer traction magnets. The motor is a polished and tuned "G" armature, and it comes with a set of Custom Chrome Wheels, and a pair of Slip-On Silicone rear tires for amazing handling. This car is fast, handles great, and is easy to drive.  It will run on any standard power supply and works on Tomy, Tyco, Lifelike, Auto World, Model Motoring, and most other HO Slot tracks.

Ford #59 Cobra GT on G3 Chassis with Poly Mags





The highly detailed Tomy AFX #59 Ford Cobra GT HO Slot car body is one of the best looking HO hardbodies ever made. It is made from one of Tomy's new "Clear" bodies, giving it clear windows and a detailed interior.  Couple all of this with the superior HO racing inspired G3 chassis and the thick "Polyforce" traction magnets, and you have an amazing hardbody combination.  It's faster and better handling than any stock Mega-G, Super G+, SRT, or Turbo you will ever find. This IS the set-up to have if you want to run fast AND look good doing it. This package includes: Pro-pickup shoes and bonded (hand-notched) Polymer traction magnets. The motor is a polished and tuned "G" armature, and it comes with a set of Custom Chrome Wheels, and a pair of Slip-On Silicone rear tires for amazing handling. This car is fast, handles great, and is easy to drive.  It will run on any standard power supply and works on Tomy, Tyco, Lifelike, Auto World, Model Motoring, and most other HO Slot tracks.

FULL RACE "PINNED" G3-R "Stiff" CHASSIS w/posts

This is a "Full Race" BSRT G3-R Stiff Chassis. 

It is used mostly for Modifieds, R/O, and NEO Cars.   

                   

$32.00

PRO 22 Tooth CROWN GEAR on Axle

$9.00

PRO 24 Tooth CROWN GEAR on Axle

$9.00

G3 & G+ Snap in, Hop-up kit with Slip-on Silicone Tires

$14.00

The fastest and easiest (and cheapest) way to make your G3 or G+ car better is to replace the wheels and tires. This low cost kit comes with narrow rear wheels and tires to fit the G3's wider traction magnets. This will immediately make your stock car faster and handle better (due to better grip and a lower center of gravity). You simply remove the stock front and rear axles and pop in the new set. For the front you get O-ring style front wheels and axle, and for the rear you get a set up of double flanged narrow rims and narrow slip on silicone tires - along with a BSRT Pro Crown gear for faster and smoother performance. Also works with Tomy Super G+ when you have wide traction magnets. YOU'LL BE AMAZED AT THE DIFFERENCE.

Tomy G+ and BSRT G3 - Endbell Tool

Dear abigone,
I have purchased one of these endbell tools, but have not been able to figure out how to use it. Could you please tell me how to use or direct me to a website with directions on use. Thank you.
Audi-dude
.................................................................................
 
Audi-dude,
Here ya go! Insert the endbell tool into the slots on the front of the Tomy endbell and turn it. It will separate the motor brushes so that you can remove or install the armature.
Thanks - abigone

It also works with Tomy Turbo and several other old HO can motors. 

No longer available

TOMY AFX - #2 FORD GT-40 with BSRT G3-R - Poly Mags

This is an awesome highly detailed Tomy AFX, Ford GT-40 HO Slot car body mounted on a BSRT G3-R chassis that has lots of high performance parts including: BSRT Pro-pickup shoes and bonded (notched) Polymer traction magnets. The motor has a polished and tuned G+ armature, and it comes with set of Custom Chrome Wheels and a pair of Slip-On Silicone rear tires for amazing handling. This car is fast, handles great, and is easy to drive. You get the best of both! A great HO slotcar chassis and a very sweet and low GT-40 body all set up for fast racing.

$65.00 plus shipping

Taka-Q #37 Toyota 88C - Custom BSRT G3R w/Poly Mags

This is a custom painted "Taka-Q #37 Toyota 88C " HO Slot car body by Jim "Concours" Williams. The BSRT G3-R chassis has lots of high performance parts including: BSRT Pro-pickup shoes, an O-ring front end, and a High Performance Crown Gear and Polymer traction magnets. The motor has a polished and tuned G+ armature, and it comes with a pair of Double flanged rims and Slip-On Silicone rear tires for amazing handling. This car is fast, handles great, and is easy to drive. You get the best of both! A great HO slotcar and an awesome Jim William's custom painted lexan body already mounted.

SOLD - 4/27/10

BSRT G3-R NEO CAR - THE ULTIMATE HO SLOTCAR! FASTEST!

$225.00

THE ULTIMATE!

A PRO BSRT G3-R NEO SLOT CAR!! IF YOU WANT THE KIND OF SLOTCAR THAT YOU CAN TAKE TO ANY RACE AND BE COMPETITIVE, THEN THIS IS WHAT YOU ARE LOOKING FOR. This is a "PRO - NEO (Drop in NEO) CLASS (The fastest class of HO Slot racing with commercially available parts ).

This car is race legal for most of the NEO racing rules out there (Hopra, Ufhora, Hopac, Marc, Schor, etc.).

THIS CAR HAS THE SAME BASIC SET-UP THAT WON AND SET RECORDS AT THE G3 CHAMPIONSHIPS, AND WON AT THE HOPRA NATS

• 34 GAUGE CUSTOM WOUND ARMATURE.
• PINNED BSRT G3-R "STIFF" CHASSIS
• NEO/POLYMER MOTOR MAGNETS
• NEO TRACTION MAGNETS
• PRO ALUMINUM FRONT WHEELS
• MOTOR BALL BEARINGS
• GOLD ENDBELL
• HARDENED PRO GUIDE PIN
• PRO PICK UP SHOES
• DOUBLE COIL PICKUP SPRING SET
• PRO POLYMER GEAR SET
• HARDENED REAR AXLE
• "NEO/UNLIMITED" HARD REAR TIRES

This car can be raced on Tomy, Tyco, Lifelike, Marchon, and custom HO Slot car tracks with an adequate power supply (minimum 2 amps per lane). It was built and race-tuned by one of So-Cal's fastest magnet racers.

THIS IS IT! ABOUT AS FAST AND AS MUCH FUN AS YOU CAN HAVE! AN ULTRA-SUPER- FAST HO SLOT CAR.  THIS IS A SUPER BUTT KICKIN' REAL HO CAR, IT IS NOT FOR THE WIMPY!

IT'S FASTER THAN ANY OF THE CARS IN THIS VIDEO: CLICK HERE → http://www.youtube.com/watch?v=kuBXJViwuJw

GAINSCO PONTIAC #99 DPT on BSRT G3R Chassis

This is a BSRT G3-R "MODIFIED" with a CUSTOM PAINTED GAINSCO #99 "RED DRAGON" DAYTONA PROTOTYPE PONTIAC HO Slot car body by Jim "Concours" Williams. Because it's a "MODIFIED" (which means it has a 3.0 ohm armature, ceramic motor magnets, and polymer traction magnets) it's FAST! This car is race legal for most of the modified class racing rules out there yet YOU CAN STILL RUN IT ON A HOME OR CLUB TRACK WITH A STOCK POWER SUPPLY! This slot car is is a brand new and READY TO RACE. It has a super fast 37 gauge "BLUE" armature, a Independent Delrin front end. G3 PRO PICK-UP SHOES, Strong bonded POLYMER TRACTION MAGNETS, a BSRT crown gear, and a pair of "Radical Radial" Silicone sponge rear tires (colors may vary). G3-R chassis also has an adjustable guide pin. This car can be raced on Tomy, Tyco, Lifelike, Marchon, and custom HO Slot car tracks.

Sold - 4/21/10

Custom NISSAN NPT-90 w/ BSRT G3R & T+ Bulkhead

This is a custom painted "NISSAN NPT 90 GTP ZX-Turbo" HO Slot car body by Jim "Concours" Williams. It is set up as a T+/G3-R, which is a BSRT G3R Chassis with a DeCosmo T+ Bulkhead and Tyco Pick-up shoes and springs.  You probably haven't seen this kind of set-up unless you go to the big national races. But a lot of fast racers know that this a very hot and very fast set-up for the G3R (especially on certain tracks).

BSRT G3-R MODIFIED - DHL PORSCHE RS SPYDER, POLY MAGS

This BSRT G3-R "MODIFIED" that recently Sold on eBay has a CUSTOM PAINTED DHL PORSCHE RS SPYDER LMP2" HO Slot car body by Jim "Concours" Williams. Because it's a "MODIFIED" (which means it has a 3.0 ohm armature, ceramic motor magnets, and polymer traction magnets) it's FAST! This car is race legal for most of the modified class racing rules out there yet YOU CAN STILL RUN IT ON A HOME OR CLUB TRACK WITH A STOCK POWER SUPPLY!

BSRT G3-R MODIFIED, PORSCHE BRUMOS DPT, POLY MAGS

This is a BSRT G3-R "MODIFIED" with a CUSTOM PAINTED BRUMOS PORSCHE DAYTONA PROTOTYPE HO Slot car body by Jim "Concours" Williams. Because it's a "MODIFIED" (which means it has a 3.0 ohm armature, ceramic motor magnets, and polymer traction magnets) it's FAST!